HP Hewlett Packard Hewlett Packard Computer Monitor X20LED User Manual |
HP x20LED, x22LED, x22LEDc and x23LED Monitors
User Guide
© 2010 Hewlett-Packard Development Company, L.P.
Microsoft, Windows, and Windows Vista are either
trademarks or registered trademarks of Microsoft
Corporation in the United States and/or other countries.
The only warranties for HP products and services are set
forth in the express warranty statements accompanying
such products and services. Nothing herein should be
construed as constituting an additional warranty. HP shall
not be liable for technical or editorial errors or omissions
contained herein.
This document contains proprietary information that is
protected by copyright. No part of this document may be
photocopied, reproduced, or translated to another
language without the prior written consent of Hewlett-
Packard Company.
Document Part Number: 603461-002
Second Edition, (June 2010)
About This Guide
This guide provides information on setting up the monitor, installing drivers, using the
on-screen display menu, troubleshooting and technical specifications.
WARNING! Text set off in this manner indicates that failure to follow directions
could result in bodily harm or loss of life.
CAUTION: Text set off in this manner indicates that failure to follow directions
could result in damage to equipment or loss of information.
NOTE: Text set off in this manner provides important supplemental information.
ii
Table of Contents
HP LCD Monitors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Important Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Maintenance Guidelines. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Cleaning the Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Unpacking the Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Installing the Monitor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Connecting Monitor Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
High-Bandwidth Digital Content Protection (HDCP). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Connecting the Power Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
CD Software and Utilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Installing Drivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Installing the monitor driver software from the CD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Downloading updated drivers from the Internet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Front-Panel Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Using the On-Screen Display (OSD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Selecting Video Input Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Identifying Monitor Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Adjusting Screen Quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Power-Saver Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
ENWW
iii
Solving Common Problems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Getting Support from hp.com . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Preparing to Call Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Preset Video Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
German Ergonomics Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Japanese Power Cord Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Materials Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Disposal of Waste Equipment by Users in
Private Household in the European Union . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Chemical Substances. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Restriction of Hazardous Substances (RoHS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Turkey EEE Regulation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
iv
1. Product Features
HP LCD Monitors
The HP LCD (liquid crystal display) monitors have an active matrix, thin-film transistor
(TFT) screen with the following features:
•
•
Large diagonal display
Maximum graphics resolution:
x20LED: 1600 x 900 @ 60Hz
x22LED/x22LEDc: 1920 x1080 @ 60Hz
x23LED: 1920 x 1080 @ 60Hz
Plus full-screen support for lower resolutions
VGA analog signal
•
•
•
DVI digital signal
Easy viewing from a sitting or standing position, or while moving from one side of
the monitor to the other
•
•
•
•
•
Tilt adjustment
Removable base
Security lock slot for a locking security cable (security cable sold separately)
Plug and Play capability, if supported by your computer system
On-screen display (OSD) adjustments for ease of setup and screen optimization
(choose English, Spanish, French, Portuguese, Russian, Simplified Chinese,
Traditional Chinese, Korean)
•
•
Power Saver to reduce energy consumption
Energy-efficient white LED backlight using less power than standard LCD
monitors
•
•
HDCP (High Bandwidth Digital Content Protection) on DVI input
Software and utilities CD, containing the following:
Drivers
Documents
ENWW
HP LCD Monitors
1
2. Safety and Maintenance Guidelines
Important Safety Information
A power cord is included with the monitor. If another cord is used, use only a power
source and connection appropriate for this monitor. For information on the correct
on Chapter 3 .
WARNING! To reduce the risk of electric shock or damage to the equipment:
•
•
•
Do not disable the power cord grounding feature. The grounding plug is an
important safety feature.
Plug the power cord in a grounded (earthed) outlet that is easily accessible at all
times.
Disconnect power from the product by unplugging the power cord from the
electrical outlet.
For your safety, do not place anything on power cords or cables. Arrange them so that
no one may accidentally step on or trip over them. Do not pull on a cord or cable.
When unplugging from the electrical outlet, grasp the cord by the plug.
To reduce the risk of serious injury, read the Safety and Comfort Guide . It describes
proper workstation, setup, posture, and health and work habits for computer users,
and provides important electrical and mechanical safety information. This guide is
one is included with the monitor.
CAUTION: For the protection of the monitor, as well as the computer, connect all
power cords for the computer and its peripheral devices (such as a monitor, printer,
scanner) to some form of surge protection device such as a power strip or
Uninterruptible Power Supply (UPS). Not all power strips provide surge protection; the
power strips must be specifically labeled as having this ability. Use a power strip
whose manufacturer offers a Damage Replacement Policy so you can replace the
equipment, if surge protection fails.
Use the appropriate and correctly sized furniture designed to properly support your
HP LCD monitor.
WARNING: LCD monitors that are inappropriately situated on dressers, book
cases, shelves, desks, speakers, chests, or carts may fall over and cause personal
injury. Care should be taken to route all cords and cables connected to the LCD
monitor so that they can not be pulled, grabbed, or tripped over.
Safety Precautions
•
Use only a power source and connection compatible with this monitor, as
indicated on the label/back plate of the monitor.
•
Be sure the total ampere rating of the products connected to the outlet does not
exceed the current rating of the electrical outlet, and the total ampere rating of the
products connected to the power cord does not exceed the rating of the power
cord. Look on the power label to determine the ampere rating (Amps or A) for
each device.
2
Chapter 2. Safety and Maintenance Guidelines
ENWW
•
•
Install your monitor near a power outlet that you can easily reach. Disconnect the
monitor by grasping the plug firmly and pulling it from the outlet. Never disconnect
the monitor by pulling the cord.
Do not allow anything to rest on the power cord. Do not walk on the cord
Maintenance Guidelines
To enhance the performance and extend the life of the monitor:
•
Do not open the monitor cabinet or attempt to service this product yourself. Adjust
only those controls that are covered in the operating instructions. If the monitor is
not operating properly or has been dropped or damaged, contact an authorized
HP dealer, reseller, or service provider.
•
•
Use only a power source and connection appropriate for this monitor, as indicated
on the label/back plate of the monitor.
Be sure the total ampere rating of the products connected to the outlet does not
exceed the current rating of the electrical outlet, and the total ampere rating of the
products connected to the cord does not exceed the rating of the cord. Look on
the power label to determine the ampere rating (AMPS or A) for each device.
•
•
•
Install the monitor near an outlet that you can easily reach. Disconnect the
monitor by grasping the plug firmly and pulling it from the outlet. Never disconnect
the monitor by pulling the cord.
Turn the monitor off when not in use. You can substantially increase the life
expectancy of the monitor by using a screen saver program and turning off the
monitor when not in use
Slots and openings in the cabinet are provided for ventilation. These openings
must not be blocked or covered. Never push objec ts of any kind into cabinet slots
or other openings.
•
•
•
Do not drop the monitor or place it on an unstable surface.
Do not allow anything to rest on the power cord. Do not walk on the cord.
Keep the monitor in a well-ventilated area, away from excessive light, heat or
moisture.
•
When removing the monitor base, you must lay the monitor face down on a soft
area to prevent it from getting scratched, defaced, or broken.
Cleaning the Monitor
1. Turn off the monitor and the computer.
2. Unplug the monitor from the wall outlet or the power brick.
3. Clean the monitor plastics with a clean cloth dampened with water.
4. Clean the monitor screen with an antistatic screen cleaner.
CAUTION: Do not use benzene, thinner, ammonia, or any other volatile
substances to clean the monitor or the screen. These chemicals may damage the
cabinet finish as well as the screen.
ENWW
Maintenance Guidelines
3
3. Setting Up the Monitor
Unpacking the Monitor
1. Unpack the monitor. Make sure all contents are included. Store the packing box.
2. Turn off the computer and other attached devices.
3. Prepare a flat area to assemble the monitor. You may need a flat, soft, protected
area for placing the monitor screen-down while preparing it for installation.
Installing the Monitor
1. Set the monitor screen face down on a flat, soft, protected table or desk surface
with the support column overhanging the edge.
2. Push the base to the monitor support column and fasten the screw to lock it.
Figure 3-1 Installing the Base
CAUTION: The screen is fragile. Avoid touching or applying pressure to the LCD
screen; doing so can cause damage.
3. Lift the monitor to an upright position and place on a flat, stable surface.
Figure 3-2 Monitor in Upright Position
4
Chapter 3. Setting Up the Monitor
ENWW
Connecting Monitor Cables
Connecting the VGA (Analog) Cable or DVI-D (Digital) Cable
Use a VGA video cable or a DVI-D cable to connect your monitor to your computer. To
use DVI, you must have a DVI-compliant graphic card. Connectors are located on the
back of the monitor. Be sure the computer and monitor are turned off and unplugged.
1. To connect the VGA cable (provided with select models)
Connect one end of the VGA video cable to the back of the monitor and the other end
to the VGA video connector on the computer.
2. To connect the DVI-D cable (provided with select models)
Connect one end of the DVI-D video cable to the back of the monitor and the other
end to the DVI-D video connector on the computer. You can use this cable only if your
computer has a DVI compliant graphics card installed. The monitor DVI-D connector
and cable are included.
Figure 3-3 Connecting the VGA or a DVI-D cable - connector locations may vary
High-Bandwidth Digital Content Protection (HDCP)
Your monitor supports HDCP and can receive high-definition content. High-definition
content is available in many sources, such as Blue-ray Disc devices or HDTV air or
cable broadcasts. If you do not have an HDCP-enabled monitor, you will see a blank
screen or a lower resolution picture when playing high-definition protected content.
Your computer graphics card and monitor must both support HDCP to display
protected content.
Connecting the Power Cable
1. Follow all Electrical and Power Warnings
WARNING! To reduce the risk of electric shock or damage to your equipment: Do
not disable the power cord grounding plug. The grounding plug is an important safety
feature.
Plug the power cord into a grounded (earthed) electrical outlet.
Be sure that the grounded power outlet you plug the power cord into is easily
accessible to the operator and located as close to the equipment as possible. A power
cord should be routed so that it is not likely to be walked on or pinched by items that
are placed upon it or against it.
Do not place anything on power cords or cables. Arrange them so that no one may
accidentally step on or trip over them. Do not pull on a cord or cable.
ENWW
Connecting Monitor Cables
5
Figure 3-4 Connecting the power cable
2. Connect one end of the power cable to the adapter and the other end to a
grounded electrical outlet.
3. Connect the adapter plug to the monitor DC Jack.
6
Chapter 3. Setting Up the Monitor
ENWW
4. Operating the Monitor
CD Software and Utilities
The CD that is included with this monitor contains drivers and software that you can
install on your computer.
Installing Drivers
If you determine that you need to update the drivers, you can install the monitor driver
INF and ICM files from the CD, or download them from the Internet.
Installing the monitor driver software from the CD
To install the monitor driver software from the CD:
1. Insert the CD in your computer CD drive. The CD menu appears.
2. Select the language.
3. Click Install Monitor Driver Software .
4. Follow the on-screen instructions.
5. Ensure that the proper resolutions and refresh rates appear in the Display Control
Panel settings.
Refer to the Windows® operating system documentation for more information.
NOTE: You might need to install the digitally signed monitor drivers (INF or ICM
files) manually from the CD, in case of an installation error. Refer to the "Driver
Software Readme" file on the CD for instructions (in English only).
Downloading updated drivers from the Internet
To download the latest version of drivers and software files from the HP Support site:
2. Select your country/region.
3. Select Download Drivers and Software .
4. Enter the model number of your monitor. The software download pages for your
monitor are displayed.
5. Download and install the driver and software files by following the instructions on
the download pages.
6. Ensure that your system meets the requirements.
ENWW
CD Software and Utilities 7
Front-Panel Controls
The monitor buttons are located on the bottom of the front panel
Figure 4-1 Front-panel control
button
No. Icon
Description
1
Power
Turns the monitor on or puts it in standby or sleep mode. The Power
depending on the model.
2
3
Menu
+
Opens, selects, or exits the OSD menu.
Navigates forward through the OSD menu and increases adjustment
levels.
4
5
-
Navigates backward through the OSD menu and decreases adjustment
levels.
Auto
To utilize the auto-adjustment feature, press the key and release it
immediately. To use input source selection function, press and hold the
key for 3 seconds (multi-source models).
Hot Key definition:
Auto: Auto configure; Press for 3 seconds, Source select
- : ECO mode select when OSD is not active
+: Image ratio select when OSD is not active
8
Appendix 4. Operating the Monitor
ENWW
Using the On-Screen Display (OSD)
Main
Main
1st Sub
2nd Sub
Adjust
Range
Menu Item Menu Icon Menu Item Menu Item
Description
Reset Value
Luminance Contrast N/A
Contrast from Digital-register. 0-100
Each step will increase/
Recall Warm
Contrast Value
decrease value by 1
Brightness N/A
Backlight Adjustment
Each step will increase/
decrease value by 1
0-100
Recall Warm
Brightness Value
Eco Mode
N/A
Picture Adjustment,
Brightness = 90,
Contrast = 50.
Standard Recall to
Standard Mode
Brightness, Contrast
Adjustable
Brightness = 20,
Text
Contrast = 50.
Brightness, Contrast Grayed.
Brightness = 40,
Contrast = 50.
Brightness, Contrast
Grayed.
Internet
Brightness = 60
Contrast = 50,
Brightness, Contrast Grayed
Game
Movie
Sports
On/Off
Brightness = 80,
Contrast = 50,
Brightness, Contrast Grayed
Brightness = 100,
Contrast = 50,
Brightness, Contrast Grayed
DCR
N/A
Dynamic contrast ratio
Recall Off Value
ENWW
Using the On-Screen Display (OSD)
9
Main
Main
1st Sub
2nd Sub
Adjust
Range
Menu Item Menu Icon Menu Item Menu Item
Description
Reset Value
Do Auto
Image
Setup
Clock
N/A
Adjust picture Clock to reduce 0-100
Vertical-Line noise.
Configure
Each step will increase/
decrease value by 1
Phase
N/A
Adjust Picture Phase to
0-100
Do Auto
reduce Horizontal-Line noise.
Configure
H. Position N/A
Adjust the horizontal position 0-100
of the picture.
Do Auto
Configure
V. Position
N/A
N/A
Adjust the vertical position of 0-100
the picture.
Do Auto
Configure
Image
Ratio
Select Image Aspect Ratio
Wide
4:3
Default to panel
native aspect ratio
10 Appendix 4. Operating the Monitor
ENWW
Main
Main
Sub
Adjust
Range
Menu Item Menu Icon Menu Item
Description
Reset Value
The Color
Temperature will
be set to Warm.
Color Temp.
Warm
Normal
Cool
Recall Warm Color
Temperature.
N/A
Recall Normal Color
Temperature.
N/A
N/A
N/A
The User R/G/B
value (default is
50) will be
modified by Reset
function in user
mode.
Recall Cool Color
Temperature.
sRGB
Recall sRGB Color
Temperature.
(for select
modelswith
sRGB
function)
Red
Red Gain from Digital-
register.
0-100
0-100
0-100
Each step will increase/
decrease value by 1
Green
Blue
Green Gain from Digital-
register.
Each step will increase/
decrease value by 1
Blue Gain from Digital-
register.
Each step will increase/
decrease value by 1
ENWW
Using the On-Screen Display (OSD) 11
Main
Main
Sub
Adjust
Range
Menu Item Menu Icon Menu Item
Description
Reset Value
OSD Setup
H. Position Adjust the horizontal position 0-100
of the OSD.
Recall 50 Value
Each step will increase/
decrease value by 5
V. Position
Adjust the vertical position of 0-100
the OSD.
Recall 50 Value
Recall 10 Value
Each step will increase/
decrease value by 5
Timeout
Adjust the OSD timeout.
5-100
Each step will increase/
decrease value by 5
Language
Set OSD display language to
English. (English is default
setting)
No need to recall
language while
press "RESET".
If customer have
different request,
please refer to
customer request
12 Appendix 4. Operating the Monitor
ENWW
Main
Main
Sub
Adjust
Range
Menu Item Menu Icon Menu Item
Description
Reset Value
Extra Input Select Select video input signal.
D-SUB
Note: Analog-
Only Model no
"Input Select"
item.
DVI
DDC/CI
Reset
Select DDC/CI on or off
On
Off
Clear each old status of Auto- Yes
configuration and set the color
temperature to Warm.
N/A
N/A
Do not execute reset, return
to main menu.
No
Information Show the resolution, H/V
frequency.
N/A
ENWW
Using the On-Screen Display (OSD) 13
Selecting Video Input Connectors
The input connectors are:
•
•
VGA connector (analog)
DVI-D connector (digital)
The monitor automatically determines which inputs have valid video signals, and
displays the image.
You can connect the VGA cable, the DVI-D cable, or both. If both cables are installed,
the default input selection is DVI.The source of input can be switched using the Input
Select option in the OSD menu.
Identifying Monitor Conditions
Special messages appear on the monitor screen for the following monitor conditions:
Input Signal Out of Range - When the Hsync Frequency, Vsync Frequency or
Resolution is out of the monitor support range, The monitor will show this message.
No Signal - When the video cable is not connected, or the video cable is connected
but there is no active signal input, the monitor will show this message, after 9 seconds
the monitor will enter power saving. This message location is at the position setting in
"OSD Setup" item.
Auto Adjustment in Progress - Indicates the auto adjustment function is active. See
"Adjusting Screen Quality" in this chapter.
Adjusting Screen Quality
The auto adjustment feature automatically fine-tunes the image quality for display
size, position, clock, and phase each time a new video mode is displayed. For more
precise adjustments of VGA input, run the Auto Adjustment software on the CD. If you
want additional image quality improvement, use the Clock and Phase controls of the
monitor to fine tune the image. See "Optimizing Analog Video" in this chapter.
Optimizing Analog Video
Some monitors contain advanced circuitry that allow the monitor to function as a
standard analog monitor. Two controls in the OSD menu can be adjusted to improve
analog image performance:
Clock - Increase or decrease the value to minimize any vertical bars or stripes visible
on the screen background.
Phase - Increase or decrease the value to minimize video distortion or video jitter.
Use these controls only when the auto adjustment function does not provide a
satisfactory monitor image in analog mode. To obtain the best results:
1. Allow the monitor to warm up for 30 minutes before adjusting.
2. Access the OSD menu, then select Image Setup.
3. Set the main Clock settings correctly first, because the Phase settings depend on
the main Clock settings.When adjusting the Clock and Phase values, if the
monitor images become distorted,continue adjusting the values until the distortion
disappears. To restore the factory settings, access the OSD menu, select Factory
Reset , and then select Yes .
14 Appendix 4. Operating the Monitor
ENWW
Power-Saver Feature
When the monitor is in normal operating mode, the Power light is blue and the monitor
(Appendix B). The monitor also supports a power-saver mode that is controlled by the
computer. When the monitor is in the reduced-power state, the monitor screen is
blank, the backlight is off, and the Power light is amber. The monitor uses minimum
power. When the monitor is "awakened," a brief warm-up period occurs before the
monitor returns to normal operating mode. The energy-saving reduced power state
activates if the monitor does not detect either the horizontal sync signal or the vertical
sync signal. The power-saver feature must be activated on your computer for this
feature to work. Refer to your computer documentation for instructions on setting
energy-saver features (sometimes called power-management features).
NOTE: The energy-saver feature works only when the monitor is connected to
computers that have energy-saver features.
ENWW
Power-Saver Feature 15
A. Troubleshooting
Solving Common Problems
The following table lists possible problems, the possible cause of each problem, and
the recommended solutions:
Problem
Power LED Is Not ON
Possible Solutions
•
Make sure the power button is ON and the Power Cord is
properly connected to a grounded power outlet and to the
monitor.
•
•
Make sure the external power adapter is connected to DC-
input on the rear of the monitor.
No Plug & Play
In order for the Plug & Play feature of the monitor to work,
you need a Plug & Play compatible computer & video card.
Check with your computer manufacturer. Also check the
monitor's video cable and make sure none of the pins are
bent.
•
Make sure the HP Monitor Drivers are installed (HP Monitor
Drivers are available at : http://www.hp.com/support)
Picture Is Fuzzy & Has
Ghosting Shadowing
Problem
•
•
Adjust the Contrast and Brightness Controls.
Make sure you are not using an extension cable or switch
box. We recommend plugging the monitor directly to the
video card output connector on the back of your computer.
Picture Bounces, Flickers Or
Wave Pattern Is Present In
The Picture
•
•
Move electrical devices that may cause electrical
interference as far away from the monitor as possible.
Use the maximum refresh rate your monitor is capable of at
the resolution your are using.
Monitor Is Stuck In Active
Off-Mode
•
•
The Computer Power Switch should be in the ON position.
The Computer Video Card should be snugly seated in its
slot.
•
•
Make sure the monitor's video cable is properly connected to
the computer.
Inspect the monitor's video cable and make sure none of the
pins are bent.
Missing one of the primary
colors (RED, GREEN, or
BLUE)
•
•
Inspect the monitor's video cable and make sure that none
of the pins are bent.
Make sure the monitor's video cable is properly connected to
the computer.
Screen image is not
centered or sized properly
•
•
Adjust H-Position and V-Position or press hot-key (AUTO).
Picture has color defects
(white does not look white)
Adjust RGB color or select color temperature
16 Appendix A. Troubleshooting
ENWW
Problem
Possible Solutions
Horizontal or vertical
disturbances on the screen
•
Adjust CLOCK and Phase or press the Auto button to
display ideal setting. To optimize the screen performance for
VGA input, use the Auto button button on the monitor and
the auto-adjustment pattern software utility on the CD
provided. For DVI input, adjust the video graphics card
installed in the PC.
Getting Support from hp.com
Before you contact customer service, refer to HP Technical Support at:
Select your country/region, and then follow the links to the support page for your
monitor.
Preparing to Call Technical Support
If you cannot solve a problem by using the troubleshooting tips in this section, you
might have to call technical support. For technical support contact information, refer to
the printed documentation included with the monitor.
Have the following information available when you call:
• Monitor model number (located on label on back of monitor)
• Monitor serial number (located on label on back of monitor or in the OSD display
in the Information menu)
• Purchase date on invoice
• Conditions under which the problem occurred
• Error messages received
• Hardware configuration
• Name and version of hardware and software you are using
Locating the Rating Label
The rating label on the monitor provides the product number and serial number. You
may need these numbers when contacting HP about your monitor model.
The rating label is on the back of the monitor.
ENWW
17
B. Technical Specifications
All specifications represent the typical specifications provided by HP's component
manufacturers; actual performance may vary either higher or lower.
HP LCD Monitors
Face treatment: Glare polarizer with hard coating
Input terminal:
VGA connector
DVI-D 24-pin D-type connector
Table B-1 Model x20LED
Specifications:
Display Type:
TFT LCD active matrix
Viewable Image Size
Tilt
50.8 cm (20 in.) diagonal
-4° (+/-2)~+13° (+/-2)
2.7 kg(5.6 lbs)
Maximum Weight (unpacked)
Dimensions (h x w x d)
491.8 mm x 356.6 mm x 165.9 mm
19.3 x 14.0 x 6.5 in
1600 x 900 @ 60 Hz
1600 x 900 @ 60 Hz
720x400
Maximum Graphics Resolution
Optimum Graphics Resolution
Text Mode
Dot Pitch
0.2768 x 0.2768 mm/0.01 x 0.01 in
24 to 85 kHz
Horizontal Frequency (analog mode)
Vertical Frequency (analog mode)
Environmental Requirements
Temperature (independent of altitude)
Operating Temperature
50 to 76 Hz
41° to 104° F (5° to 40° C)
Non-Operating Temperature
Relative Humidity (non-condensing)
Operating Humidity
-4° to 140° F (-20° to 60° C)
15% to 90%
Non-Operating Humidity
Power Source
15% to 90%
100-240V~, 50/60 Hz
30 watts (W)
Power Consumption
Sleep Power Consumption
<1.0 watts (W)
ENWW
18
Table B-2 Model x22LED/ x22LEDc
Specifications:
Display Type:
TFT LCD active matrix
54.6 cm (21.5 in.) diagonal
-4° (+/-2)~+13° (+/-2)
2.9 kg(6.4 lbs)
Viewable Image Size
Tilt
Maximum Weight (unpacked)
Dimensions (h x w x d)
525.5 mm x 376.0 mm x 165.9 mm
20.6 x 14.8 x 6.5 in
1920 x 1080 @ 60 Hz
1920 x 1080 @ 60 Hz
720 x 400
Maximum Graphics Resolution
Optimum Graphics Resolution
Text Mode
Dot Pitch
0.248 x 0.248 mm/0.01 x 0.01 in
24 to 83 kHz
Horizontal Frequency (analog mode)
Vertical Frequency (analog mode)
Environmental Requirements
Temperature (independent of altitude)
Operating Temperature
50 to 75 Hz
41° to 104° F (5° to 40° C)
Non-Operating Temperature
Relative Humidity (non-condensing)
Operating Humidity
-4° to 140° F (-20° to 60° C)
15% to 90%
Non-Operating Humidity
Power Source
15% to 90%
100-240V~, 50/60 Hz
30 watts (W)
Power Consumption
Sleep Power Consumption
<1.0 watts (W)
19 Appendix B. Technical Specifications
ENWW
Table B-3 Model x23LED
Specifications:
Display Type:
TFT LCD active matrix
58.4 cm (23 in.) diagonal
-4° (+/-2)~+13° (+/-2)
3.6 kg(7.9 lbs)
Viewable Image Size
Tilt
Maximum Weight (unpacked)
Dimensions (h x w x d)
569.3 mm x 407.8 mm x 185.9 mm
22.4 x 16 x 7.3 in
1920 x 1080 @ 60 Hz
1920 x 1080 @ 60 Hz
720 x 400
Maximum Graphics Resolution
Optimum Graphics Resolution
Text Mode
Dot Pitch
0.265 x 0.265 mm/0.01 x 0.01 in
24 to 83 kHz
Horizontal Frequency (analog mode)
Vertical Frequency (analog mode)
Environmental Requirements
Temperature (independent of altitude)
Operating Temperature
50 to 75 Hz
41° to 104° F (5° to 40° C)
Non-Operating Temperature
Relative Humidity (non-condensing)
Operating Humidity
-4° to 140° F (-20° to 60° C)
15% to 90%
Non-Operating Humidity
Power Source
15% to 90%
100-240V~, 50/60 Hz
30 watts (W)
Power Consumption
Sleep Power Consumption
<1.0 watts (W)
ENWW
20
Preset Video Modes
The monitor automatically recognizes many preset video input modes that will appear
properly sized and centered on the screen.
Table B-4 Factory Preset Video Input Modes, x20LED model
Item
Preset Resolution
640 x 480
Horizontal Frequency (kHz)
Vertical Frequency (Hz)
1
2
3
4
5
6
7
8
31.469
31.469
37.879
48.363
45.00
59.94
720 x 400
70.087
60.317
60.004
60.00
800 x 600
1024 x 768
1280 x720
1280 x 1024
1400 x 900
1600 x 900
63.981
55.935
60.000
60.02
59.887
60.000
Table B-5 Factory Preset Video Input Modes, x22LED/x22LEDc/x23LED models
Item
1
Preset Resolution
640 x 480
Horizontal Frequency (kHz)
Vertical Frequency (Hz)
59.94
31.469
31.469
37.879
48.363
45.000
60.000
63.981
60.000
75.000
65.290
67.500
2
720 x 400
70.087
3
800 x 600
60.317
4
1024 x 768
1280 x720
60.004
5
60.000
6
1280 x 960
1280 x 1024
1600 x 900
1600 x 1200
1680 x 1050
1920 x 1080
60.000
7
60.020
8
60.000
9
60.000
10
11
60.000
60.000
21 Appendix B. Technical Specifications
ENWW
LCD Monitor Quality and Pixel Policy
Your LCD Monitor uses high-precision technology, manufactured according to high
standards, to help guarantee trouble-free performance. Nevertheless, the display may
have cosmetic imperfections that appear as small bright or dark spots. This is
common to all LCD displays used in products supplied by all vendors and is not
specific to your LCD Monitor. These imperfections are caused by one or more
defective pixels or subpixels.
A pixel consists of one red, one green, and one blue subpixel. A defective whole pixel
is always turned on (a bright spot on a dark background), or it is always off (a dark
spot on a bright background). The first is the more visible of the two. A defective
subpixel (dot defect) is less visible than a defective whole pixel, and is small and only
visible on a specific background.
To locate defective pixels, the monitor should be viewed under normal operating
conditions and in normal operating mode at a supported resolution and refresh rate,
from a distance of approximately 50 cm (16 inches). We expect that, over time, the
industry will continue to improve its ability to produce displays with fewer cosmetic
imperfections, and we will adjust guidelines as improvements are made. For more
information about your LCD Monitor, refer to the HP Web site at:
ENWW
22
C. Agency Regulatory Notices
Federal Communications Commission Notice
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio or television technician for help.
Modifications
The FCC requires the user to be notified that any changes or modifications made to
this device that are not expressly approved by Hewlett Packard Company may void
the user's authority to operate the equipment.
Cables
Connections to this device must be made with shielded cables with metallic RFI/EMI
connector hoods to maintain compliance with FCC Rules and Regulations.
ENWW
23
Declaration of Conformity for Products Marked with the FCC Logo
(United States Only)
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that
may cause undesired operation.
For questions regarding the product, contact:
Hewlett Packard Company
P. O. Box 692000, Mail Stop 530113
Houston, Texas 77269-2000
Or, call 1-800-HP-INVENT (1-800 474-6836)
For questions regarding this FCC declaration, contact:
Hewlett Packard Company
P. O. Box 692000, Mail Stop 510101
Houston, Texas 77269-2000
Or, call (281) 514-3333
To identify this product, refer to the Part, Series, or Model number found on the
product.
Canadian Notice
This Class B digital apparatus meets all requirements of the Canadian Interference-
Causing Equipment Regulations.
Avis Canadien
Cet appareil numérique de la classe B respecte toutes les exigences du Réglement
sur le matériel brouilleur du Canada.
European Union Regulatory Notice
This product complies with the following EU Directives:
• Low Voltage Directive 2006/95/EC
• EMC Directive 2004/108/EC
• Ecodesign Directive 2009/125/EC where applicable
CE compliance of this product is valid only if powered with the correct CE-marked AC
adapter provided by HP.
Compliance with these directives implies conformity to applicable harmonized
European standards (European Norms) which are listed on the EU Declaration of
Conformity issued by Hewlett-Packard for this product or product family.
This compliance is indicated by the following conformity markings placed on the
product:
24 Appendix C. Agency Regulatory Notices
ENWW
This marking is valid for non-Telecom products
and EU harmonized Telecom products (e.g. Bluetooth). xxxx*
This marking is valid for EU non-harmonized Telecom products .
*Notified body number (used only if applicable - refer to the product label)
The official EU CE declaration of conformity for this device may be found at
The point of contact for regulatory matters is Hewlett-Packard GmbH, HQ-TRE,
Herrenberger Strasse 140, 71034 Boeblingen, Germany.
German Ergonomics Notice
HP products which bear the "GS" approval mark, when forming part of a system
comprising HP brand computers, keyboards and monitors that bear the "GS" approval
mark, meet the applicable ergonomic requirements. The installation guides included
with the products provide configuration information.
Japanese Notice
Korean Notice
ENWW
25
Power Cord Set Requirements
The monitor power supply is provided with Automatic Line Switching (ALS). This
feature allows the monitor to operate on input voltages between 100−120V~ or 200−
240V.
The power cord set (flexible cord or wall plug) received with the monitor meets the
requirements for use in the country where you purchased the equipment.
If you need to obtain a power cord for a different country, you should purchase a
power cord that is approved for use in that country.
The power cord must be rated for the product and for the voltage and current marked
on the product's electrical ratings label. The voltage and current rating of the cord
should be greater than the voltage and current rating marked on the product. In
addition, the cross-sectional area of the wire must be a minimum of 0.75 mm2 or 18
AWG, and the length of the cord must be between 6 feet (1.8 m) and 12 feet (3.6 m).
If you have questions about the type of power cord to use, contact an authorized HP
service provider. A power cord should be routed so that it is not likely to be walked on
or pinched by items placed upon it or against it. Particular attention should be paid to
the plug, electrical outlet, and the point where the cord exits from the product.
Japanese Power Cord Requirements
For use in Japan, use only the power cord received with this product.
CAUTION: Do not use the power cord received with this product on any other
products.
Product Environmental Notices
Materials Disposal
This HP product contains mercury in the fluorescent lamp in the display LCD that
might require special handling at end-of-life.
Disposal of this material can be regulated because of environmental considerations.
For disposal or recycling information, contact the local authorities or the Electronic
Industries Alliance (EIA)
26 Appendix C. Agency Regulatory Notices
ENWW
Disposal of Waste Equipment by Users in
Private Household in the European Union
This symbol on the product or on its packaging indicates that this product must not be
disposed of with your household waste. Instead, it is your responsibility to dispose of
your waste equipment by handing it over to a designated collection point for the
recycling or waste electrical and electronic equipment. The separate collection and
recycling of your waste equipment at the time of disposal will help to conserve natural
resources and ensure that it is recycled in a manner that protects human health and
the environment. For more information about where you can drop off your waste
equipment for recycling, please contact the local city office, the household waste
disposal service or the shop where you purchased the product.
Chemical Substances
HP is committed to providing our customers with information about the chemical
substances in our products as needed to comply with legal requirements such as
REACH (Regulation EC No 1907/2006 of the European Parliament and Council). A
chemical information report for this product can be found at
HP Recycling Program
HP encourages customers to recycle used electronic hardware, HP original print
cartridges, and rechargeable batteries. For more information about recycling
Restriction of Hazardous Substances (RoHS)
A Japanese regulatory requirement, defined by specification JIS C 0950, 2005,
mandates that manufacturers provide Material Content Declarations for certain
categories of electronic products offered for sale after July 1, 2006. To view the JIS C
ENWW
27
|
GE 26900A User Manual
Fisher Paykel CG365D User Manual
Electrolux SIG 555 User Manual
Diamond Multimedia ATI Radeon SKU X600PRO256 User Manual
Dacor Cooktop ER30DSR User Manual
Compaq C360 User Manual
Cannon 50cm Free Standing Electric Cooker Keswick User Manual
AT T E2812B User Manual
Aiwa TV F2400u, TV F2000u User Manual
Acer AL2032 User Manual