CE Mark Declaration of Conformance for EMI and Safety (EEC)
This is to certify that this product complies with ISO/IEC Guide 22 and EN45014. It conforms to the
following EMC specifications:
EM4582-SX-SC Module
User’s Guide
EN55022(1988)/CISPR-22(1985)
EN60555-2(1995)
EN60555-3
IEC1000-4-2(1995)
IEC1000-4-3(1995)
IEC1000-4-4(1995)
Class A
Class A
4kV CD, 8kV AD
3V/m
1kV - (power line),
0.5kV - (signal line)
3Vrms
The EM4582-SX-SC Slide-in Module
IEC 1000-4-6(1995)
The EM4582-SX-SC slide-in module is
designed for use in various Accton switch
models. At present, suitable units include:
This product complies with the requirements of the Low Voltage Directive 73/23/EEC and the EMC
Directive 89/336/EEC.
• CheetahSwitch Workgroup-3514F (ES3514F)
• CheetahSwitch Workgroup-3526F (ES3526F)
• CheetahSwitch Workgroup-3526G (ES3526G)
VCCI Class A Compliance (Japan)
Contact your distributor for advice on newly
released switches which may be designed for
use with these modules.
Caution: Do not install this module in any
other units.
Warranty
Accton warrants to the original owner that the product delivered in this package will be free from
defects in material and workmanship for a period of three (3) years from the date of purchase from
Accton or it’s Authorized reseller. For the warranty to apply, you must register your purchase by
returning the registration card indicating the date of purchase and including proof of purchase.
There will be a minimal charge to replace consumable components, such as fuses, power
transformers, and mechanical cooling devices. The warranty does not cover the product if it is
damaged in the process of being installed. Accton recommends that you have the company from
whom you purchased this product install it.
The EM4582-SX-SC includes 1 1000BASE-SX
(SC-Type) port which can be used for a high-
speed backbone or server connection. Detailed
information on configuring this module and
advice about Gigabit Ethernet configuration
rules can be found in the switch’s user guide.
Safety Warning
THE ABOVE WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, WHETHER EXPRESS, IMPLIED OR
STATUTORY, INCLUDING BUT NOT LIMITED TO ANY WARRANTY OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, OR ANY WARRANTY ARISING OUT OF ANY PROPOSAL,
SPECIFICATION OR SAMPLE. ACCTON SHALL NOT BE LIABLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES. ACCTON NEITHER ASSUMES NOR AUTHORIZES ANY PERSON TO
ASSUME FOR IT ANY OTHER LIABILITY.
Before installing or removing the EM4582-SX-SC,
first disconnect the switch from the main power
supply. For full safety instructions, please refer to
the user guide that accompanies the switch.
Warning: Optical Safety for Fiber Optic Modules
When using a fiber optic media
expansion module, never look at
Copyright
the transmit laser while it is powered on. Also,
never look directly at the fiber TX port and fiber
cable ends when they are powered on.
Copyright © 1999 by Accton Technology Corporation. All rights reserved. All trademarks or brand names
mentioned herein are trademarks or registered trademarks of their respective companies.
Avertissment: Ports pour fibres optiques - sécurité
sur le plan optique
Ne regardez jamais le laser tant
International Headquarters
No. 1 Creation Road III,
Science-based Industrial Park
Hsinchu 300, Taiwan, R.O.C.
Phone: 886-3-5770-270
USA Headquarters
6 Hughes
Irvine, CA 92618
Phone Numbers -
qu'il est sous tension. Ne regardez jamais
directement le port TX (Transmission) à fibres
optiques et les embouts de câbles à fibres optiques
tant qu'ils sont sous tension.
Sales:
800-926-9288
FAX: 886-3-5770-267
Support: 888-398-4101 or 949-707-4847
Internet: [email protected]
RMA:
800-762-4968
EM4582-SX-SC
E0699-R01
FAX: 949-707-2460
150079-102
|