X Micro Tech Computer Drive USB20 Flash Stick User Manual

X-Micro USB2.0 Flash Stick  
User Manual  
 
CONTENTS  
Introduction  
2
2
2
2
2
3
3
3
3
1.1 Introduction of X-Micro USB2.0 Flash Stick  
1.1.1 The main capability index  
1.1.2 X-Micro USB2.0 Flash Stick overview  
1.1.3 Connection with computer  
1.2 The system requirement of X-Micro USB2.0 Flash Stick  
1.2.1 Requirement for computer  
1.2.2 Requirement for operation system  
1.2.3Requirement for the main controller of USB  
Install application program  
3
5
X-Micro USB2.0 Flash Stick application  
3.1 Windows 98/Me/2000/XP  
3.2 Mac OS 9.x/Mac OS X  
5
6
3.3 Linux 2.4.x  
7
7
7
3.4 Notices  
Technical reference of X-Micro USB2.0 Flash Stick  
FAQ of X-Micro USB2.0 Flash Stick  
8
1
 
Guide of X-Micro USB2.0 Flash Stick  
Introduction  
1.1 Introduction of X-Micro USB2.0 Flash Stick  
X-Micro USB2.0 Flash Stick, a mass storage flash memory disk, comes from interface  
technology of USB 2.0, which is plug-and-play, electronic writing protection, high speed  
read-write.  
It is very convenient to use “X-Micro USB2.0 Flash Stick” and it can be run on several  
operation systems such as Windows 98, Windows ME, Windows 2000, Windows XP,  
Mac OS 9.x, Linux 2.4.x and above without any physical drive equipment and extra  
power; it can realize the mobile storage of data without influenced by the host computer,  
universal, huge storage.  
1.1.1 The main capability index  
Maximum data reading speed: 9MB/S  
Maximum data writing speed: 5MB/S  
Without installing driver (exclude Windows 98)  
With no physical driver  
Accord with the standard USB 2.0/1.1  
Without extra power, just from general USB cable  
Huge capacity with categories  
With the switch of reading protection, no document rubout happens or virus  
LED light indicates the working state  
Small body  
Very light: about 11 g  
1.1.2 X-Micro USB2.0 Flash Stick overview  
figure1.1  
1.1.3 Connection with computer  
X-Micro USB2.0 Flash Stick joins with computer through USB interface. If there is no  
original USB interface, you need to equip a transfer disk with PC-USB interface, and then  
you can use X-Micro USB2.0 Flash Stick Mostly. For the desktop, the USB interface is on  
the upper of the host computer back, as the picture 1.2 shows:  
2
 
USB interface  
figure: 1.2  
You can directly connect X-Micro USB2.0 Flash Stick to your desktop’s USB interface;  
and also can use a USB cable to prolong for using, all you need to do is to use one end to  
connect the host computer and use another end to connect X-Micro USB2.0 Flash Stick.  
Generally, for notebook, USB interface is on the one side or back. You can not miss it, like  
picture 1.3 to indicate. You can connect X-Micro USB2.0 Flash Stick and USB interface of  
your notebook directly without using USB cable.  
USB interface  
figure 1.3  
1.2 The system Requirement of X-Micro USB2.0 Flash Stick  
1.2.1 Requirement for computer  
PC must with USB interface or compatible desktop, notebook and super-small  
notebook;  
Apple PC must with USB interface  
1.2.2 Requirement for operation system  
Windows 98  
Windows Me  
Windows 2000  
Windows XP  
Mac OS 9.x or above  
Linux 2.4.x or above  
1.2.3 Requirement for the host controller of USB  
UHCI- universal host controller interface  
OHCI- open host controller interface  
Install application program  
For there is Windows 98 driver in the application program, so as you install the application  
program in Windows 98SE, you also install the driver program at the same time.  
Insert the CD of X-Micro USB2.0 Flash Stick into the CD-ROM, and a window will pop up,  
3
 
as follows figure 2.1:  
figure :2.1  
Click the ”Install” button to start installing application program, as follows:  
figure 2.2  
When appear the next picture, please click  
button as follows:  
figure 2.3  
System will install the program automatically, when it appears the next picture, please  
click  
button to finish the installation and restart the computer.  
4
 
figure : 2.4  
After the restart of Win98 operation system, please insert X-Micro USB2.0 Flash Stick, the  
system will find the equipment automatically and put into using.  
Notice: Please don’t insert the X-Micro USB2.0 Flash Stick before installing the driver  
program, or it may make the system can’t install automatically.  
X-Micro USB2.0 Flash Stick application  
3.1 Windows 98/Me/2000/XP  
1) Turn on your computer  
2) Connect the X-Micro USB2.0 Flash Stick and the USB interface of computer; please  
find it from session 1.1.3 of chapter 1. If the connection is OK, the indicator of X-Micro  
USB2.0 Flash Stick will turn light, that means flash memory disk is working.  
3) Open “ My computer”, you will find a new “ Removable Disk” symbol (figure 3.1). That  
is the X-Micro USB2.0 Flash Stick’s symbol. Generally, the symbol is the last one for  
the current system, if the latest disk symbol is D before connecting X-Micro USB2.0  
Flash Stick, then the disk symbol of X-Micro USB2.0 Flash Stick is E. One more need  
to pay attention: when you are using X-Micro USB2.0 Flash Stick for the first time,  
please kindly wait for a moment, because the system needs some time to find the  
driver and it only needs for the first time using.  
figure3.1  
Under the Windows Me/ 2000/XP, the bottom right of screen will show an icon, it  
means X-Micro USB2.0 Flash Stick. (Picture 3.2)  
figure3.2  
4) After then, you can use X-Micro USB2.0 Flash Stick like traditional hard disk. You can  
copy, edit, and delete the document. When it is working, the indicator light glints  
5
 
quickly. And after data reading finishes, the light will stop glinting.  
Notice: Don’t pull out the X-Micro USB2.0 Flash Stick when the light is still glinting, or  
your data will be destroyed.  
5) Please do as follows when you finish the work and want to pull out the flash memory  
disk. There are some differences for the operation systems:  
Window 98: You can pull out flash memory disk from the computer directly only if the  
indicator stops glinting.  
Windows Me/2000/XP: You need to use the left of mouse to click the disk symbol on  
the right of screen, and it will appear a menu: “ Safely remove USB Mass Storage  
Device” as follows:  
figure3.3  
Click this menu and the system will show another window to tell you” USB Mass  
Storage Device can be removed safely from the system” as follows:  
figure3.4  
Then click “OK” to close this window. After this, you can pull out the X-Micro USB2.0  
Flash Stick safely. The disk symbol will disappear in seconds.  
figure3.5  
3.2 Mac OS 9.x/Mac OS X  
1) Start your Apple PC  
2) Insert X-Micro USB2.0 Flash Stick to your Apple PC’s USB interface, the  
computer’s desk will appear a disk symbol “ Untitled” (picture 3.6), that is the  
X-Micro USB2.0 Flash Stick disk symbol. After it, you can use it like usual hard disk.  
When you need to pull it out, please draw the symbol to the bin firstly and then pull  
it out, or the document and data in the X-Micro USB2.0 Flash Stick will be lost.  
figure3.6  
6
 
3.3 Linux 2.4.x  
X-Micro USB2.0 Flash Stick has already been formatted before out of factory and its  
document system is FAT system; any Linux Kernel 2.4 of Linux can use X-Micro USB2.0  
Flash Stick. The Linux Kernel need to add the feature of USB support, and you also need  
to add USB FILE SYSTEM to use X-Micro USB2.0 Flash Stick at the same time.  
1) Turn on your computer.  
2) Insert the X-Micro USB2.0 Flash Stick to the computer’s USB interface  
Login as root, type order: mount/dev/sda/mnt  
This order will put the X-Micro USB2.0 Flash Stick to the directory of “ /mnt”. “/mnt”  
is a directory made by user.  
Notice: When you type sda item of the order mount/dev/sda/mnt, there are maybe some  
changes because the using of computer or flash memory disk. Please follow the orders of  
Linux to operate.  
3) Type the order: umount /mnt before pull out the X-Micro USB2.0 Flash Stick.  
This order is used for uninstall X-Micro USB2.0 Flash Stick .You must use this order,  
or your document will be lost. The order “/mnt” is corresponding to the upper “/mnt”  
3.4 Notices  
1) The Windows 98 system of user’s manual is the first edition and the second edition  
of Windows 98.  
2) X-Micro USB2.0 Flash Stick will not guarantee its normal operation for all the  
computers. We will not answer for any lost because of using X-Micro USB2.0  
Flash Stick. If any dispute, please solve it with relative law.  
Technologic Reference of X-Micro USB2.0 Flash Stick  
Items  
Computer  
Specified criterion  
With USB or compatible desktop, notebook and Apple PC  
Windows 98/Me/2000/XP, Mac OS 9.x/Mac OS X, Linux  
2.4.x  
Operation System  
Power  
USB supply (4.5V~5.5V)  
Host computer  
interface  
Universal serial bus standard 1.1/2.0  
UHCI OHCI  
Working electric  
current  
<80mA  
Writing protection  
Inside LED  
Yes, with switch  
Lighting: connect successfully  
Glinting: reading/Writing data  
64MB/128MB /256MB/512MB  
9MB/S Maximum  
Capacity  
Speed of reading  
Speed of writing  
Working temperature  
5MB/S Maximum  
-10°C~+50°C  
7
 
Storage temperature  
Relative humility of  
running  
-40°~+70°C  
5%~95%  
Weight  
11g  
FAQ of X-Micro USB2.0 Flash Stick  
1. Q: After I inserted the flash memory disk to the computer’s USB, the system did  
not show that it found the new equipment when I firstly used X-Micro USB2.0 Flash  
Stick as the storage part. Why? How to solve it?  
Answer: Firstly, you should check if the connection of X-Micro USB2.0 Flash Stick and  
USB is too loose. It also maybe happen when it has not been enabled in the setting of  
system’s BIOS, so you need to restart the computer and get into the BIOS setting to  
enable it. The last possible reason is that there is something wrong with your USB system  
installation or the support program of USB has not been enabled. Please follow the guide  
of User Manual to install the USB system correctly.  
2. Q: As the first time I insert X-Micro USB2.0 Flash Stick into Window 98, when I  
couldn’t install correctly after it appeared the hint of installation, I put it again to  
install. However, the system did not show the dialogue frame of “ New hard disk  
install” as last time, so I can’t install the flash memory driver, please tell me how to  
do.  
Answer: Please do step by step as follows:  
a) Reinstall the application program as chapter 2;  
b) Insert the flash memory device to the computer’s USB;  
c) Put the driver CD into the CD-ROM;  
d) Click the right side of mouse from “My computer”=>”Reference”=>”Equipments  
Manager”;  
e) Delete “unidentified Equipment” or “Other Equipments”(with yellow? or!);  
f) Click “Refresh” button;  
Wait for a moment and it will show out the installation guidance, and then follow  
the guidance to finish the installation.  
3. Q: What is the meaning of LED for X-Micro USB2.0 Flash Stick?  
Answer: The light of LED is on, X-Micro USB2.0 Flash Stick has been connected to the  
computer successfully; the light is flickering, reading/writing data.  
4. Q: What should be noticed when pull out the X-Micro USB2.0 Flash Stick?  
Answer: As the operation system, we suggest you not pull out the X-Micro USB2.0 Flash  
Stick hastily. Please pull it out after reading the data and the LED light stops glittering.  
5. Q: Why my flash memory Disk real capability is smaller than the marked?  
Answer: There is little difference about capacity of X-Micro USB2.0 Flash Stick when  
under the different of operation systems to format it. The part of space is occupied by flash  
8
 
memory disk and the system to run. That is the reason why flash memory disk’s real  
capability is smaller than the marked.  
6. Q: Is it possible to access more than one X-Micro USB2.0 Flash Stick with one  
computer?  
Answer: Sure, theoretically, one computer can access at least 127 pieces of X-Micro  
USB2.0 Flash Stick. However, due to driver disks use 26 English letters to name, while  
the present drivers have occupied several English letters, it can only access 23 pieces of  
X-Micro USB2.0 Flash Stick (exclude A. B. C) with the assistant of USB HUB.  
7. Q: When the X-Micro USB2.0 Flash Stick is using, can I run other programs?  
Answer: Yes.  
9
 

Weider Home Gym 831153990 User Manual
Westinghouse Flat Panel Television EW40T2XW User Manual
Whirlpool Dehumidifier AD40DSS0 User Manual
Whirlpool Dehumidifier WGDH160UH User Manual
Whirlpool Refrigerator 5622 285L 2G UL 110V QCS User Manual
Whirlpool Refrigerator 2204658 User Manual
Whirlpool Washer Dryer LBR6133DQ0 User Manual
Whirlpool Water Dispenser WHCF SUFC User Manual
White Rodgers Furnace FG9 User Manual
Zanussi Dishwasher ZDS 300 User Manual