Planet Technology Network Router WRT 410A User Manual

WRT-410A  
Super G Wireless Broadband Router  
Key Feature  
Internet Access Features  
• Shared Internet Access. All users in the LAN can access the Internet  
through WRT-410A, using only a single external IP Address. The local IP  
Addresses are hidden from external sources. This process is called NAT  
(Network Address Translation).  
• DSL & Cable Modem Support. The WRT-410A has a 10/100 Mbps  
Ethernet port for connecting a DSL or Cable Modem. All popular DSL and  
Cable Modems are supported.  
• PPPoE, PPTP, and L2TP Supported. The Internet (WAN port) connection  
supports PPPoE (PPP over Ethernet), PPTP (Peer-to-Peer Tunneling Protocol),  
L2TP (Layer 2 Tunnel Protocol), as well as "Direct Connection" type  
services.  
• Fixed or Dynamic IP Address. On the Internet (WAN port) connection,  
WRT-410A supports both Dynamic IP Address (IP Address is allocated on  
connection) and Fixed IP Address.  
The WRT-410A is a broadband router integrated with an 802.11g Access  
Point. With the innovative Super G technology enhanced, the maximum  
data rate of WRT-410A is 108Mbps when working with Super G supported  
wireless stations. The WRT-410A is also backward compatible and  
interoperable with IEEE 802.11b compliant wireless devices.  
Advanced Internet Functions  
• Special Internet Applications. Applications which use non-standard  
connections or port numbers are normally blocked by the Firewall. The  
ability to define and allow such applications is provided, to enable such  
applications to be used normally.  
• Virtual Servers. This feature allows Internet users to access Internet servers  
on your LAN. The required setup is quick and easy.  
The WRT-410A supports the most advanced security features available  
today: WPA and WPA2. WPA (Wi-Fi Protected Access) authorizes and  
identifies users based on a secret key that changes automatically at a  
regular interval. WPA uses TKIP and WPA2 uses AES to change the  
temporal key periodically. This insures much greater security than the  
standard WEP security. (By contrast, the older WEP encryption required the  
keys to be changed manually.)  
• DMZ. One PC of your local LAN can be configured to allow unrestricted 2-  
way communication with Servers or individual users on the Internet. This  
provides the ability to run programs which are incompatible with Firewalls.  
• URL Blocking. Use the URL Blocking to block access to undesirable Web  
sites by LAN users.  
• Internet Access Log. See which Internet connections have been made.  
• VPN pass-through Support. VPN (Virtual Private Networking) connections  
using PPTP and IPSec are transparently supported - no configuration is  
required.  
LAN Features  
• Five Ethernet ports. WRT-410A has 5 Ethernet ports. One (the WAN port)  
is connected to your DSL or Cable modem. The other 4 (the LAN ports) are  
used to connect to your local LAN.  
• DHCP Server Support. Dynamic Host Configuration Protocol (DHCP)  
provides a dynamic IP address to PCs and other devices upon request. WRT-  
410A can act as a DHCP Server for devices on your local LAN and WLAN.  
• Multi Segment LAN Support. LANs containing one or more segments are  
supported; via WRT-410A's RIP (Routing Information Protocol) support and  
built-in static routing table.  
Configuration & Management  
• Easy Setup. Use your WEB browser from anywhere on the LAN for  
configuration.  
• Remote Management. The WRT-410A can be managed from any PC on  
your LAN. And, if the Internet connection exists, it can also (optionally) be  
configured remotely via the Internet.  
For home users that will not incorporate a RADIUS server in their network,  
the security for the WRT-410A will still be much stronger than ever before.  
Utilizing the PSK (Pre Shared Key) mode of WPA, the WRT-410A will obtain  
a new security key every time, and it connects to the 802.11g network.  
You only need to enter your encryption information once in the  
configuration menu. Then you will automatically receive a new key every  
time you connect, thus highly increasing the safety of your  
communications.  
With the built-in AP on the LAN side, all wireless clients can share the same  
broadband Internet connection and access other Ethernet devices on the  
LAN through the router's built-in 4-Port switch. Virtual server, DMZ and  
natural firewall functions provide additional security and flexibility for both  
wireless and wired LAN users.  
• UPnP Support. UPnP (Universal Plug and Play) allows automatic discovery  
and configuration of WRT-410A. UPnP is by supported by Windows ME/  
2000/ XP/ Windows Server 2003 or later.  
• Firmware upgrade can be easily done in web browser.  
Security Features  
• Password - protected Configuration. Optional password protection is  
provided to prevent unauthorized users from modifying the configuration  
data and settings.  
• NAT Protection. An intrinsic side effect of NAT (Network Address  
Translation) technology is that by allowing all LAN users to share a single IP  
address, the location and even the existence of each PC is hidden. From the  
external viewpoint, there is no network, only a single device - WRT-410A.  
• Stateful Packet Inspection Firewall. All incoming data packets are  
monitored and all incoming server requests are filtered, thus protecting  
your network from malicious attacks from external sources.  
Data Sheet  
1
 

Peavey Guitar Adrian Vandenberg User Manual
Pelco TV Mount c2231m User Manual
Philips Juicer HR1821 User Manual
Philips Surge Protector SPP3226WA User Manual
Philips TV DVD Combo 28PD6932 User Manual
Philips Two Way Radio SCD463 User Manual
Pioneer DVD Player MEP 4000 User Manual
Pioneer Projector Accessories PRO 510HD User Manual
Planar Car Video System PXL2451MW User Manual
PYLE Audio Headphones PDWM5300 User Manual