Planet Technology Network Router PL 501 EU US UK User Manual

200Mbps Powerline Ethernet Bridge  
PL-501-EU/US/UK  
Quick Installation Guide  
 
Important Safety Instructions  
This product is intended for connection to the AC power line.  
The following pre-cautions should be taken when using this  
product:  
ó Please read all instructions before installing and operating this  
product.  
ó Please follow all warnings and instructions marked on the  
product.  
ó Do not operate this product near water.  
ó This product should never be place near or over radiator, or  
heat register.  
ó This product relies on a building’s electrical installation for  
short-circuit (over current) protection.  
ó Ensure that a fuse or circuit breaker is used on the phase  
conductors (all current-carrying conductors).  
ó Do not allow anything to reset on the product interconnect  
cords.  
ó Do not locate this product where people may walk on the  
cords.  
ó The power cord should be plugged directly into a specification  
AC wall outlet.  
ó Only a qualified technician should service this product. Opening  
or removing covers may result in exposure to dangerous  
voltage points or other risk.  
ó Unplug this product from the wall outlet and refer the product  
to qualified service personal for the following conditions:  
1. When the interconnect cords are damaged or frayed.  
2. If liquid has been spilled onto the product.  
3. If the product has been exposed to rain or water.  
4. If the product does not operate normally when the operating  
instructions have been followed.  
5. If the product exhibits a distinct change in performance.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Package Content  
PL-501-EU/US/UK  
n 200Mbps Powerline Ethernet Bridge  
n RJ-45 Cat.5 Cable  
n User Manual, Quick Installation Guide, and Utility CD-ROM  
n Quick Installation Guide  
If any of the above items are missing or damaged, contact your  
local dealer for support.  
Package Details  
Outlook  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LED Definition  
LED  
Status  
Description  
Steady on indicate the Powerline device  
connect to the power outlet  
Power  
On  
Blinking Blinking indicates the data are transferring  
Steady on indicates the RJ-45 port has  
correctly connected to the network card of  
your PC or the Ethernet network  
Ethernet  
Data  
On  
Blinking Data transferring in bridge mode  
On  
Connected the other HomePlug devices  
Button Definition  
Button  
Description  
Reset  
Reset to factory default  
Press security button  
Join a another  
during 1~3 seconds.  
HomePlugAV network  
Security  
Press security button  
more than 10 seconds  
Set its security to  
random value  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Planning your Powerline Network  
With a PL-501 and the other Powerline device installed, a  
network can be created over residential powerline of your  
house. PL-501 can be connected to Ethernet switch, hub,  
and broadband router or directly connected to PC. If connect  
directly to a PC, of course, the PC must be equipped with an  
Ethernet card.  
All the Powerline devices on the network must use the same  
password to communicate each other. This password can be  
configured through the Powerline Configuration utility that can  
be found in the CD-ROM. The default password of PLANET  
powerline devices is “HomePlugAV”. Thus, all the PLANET  
powerline devices can communicate each other without prior  
password configuration. Please refer to User’s Manual on detail  
of installing and using Powerline Configuration utility.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting Powerline Ethernet Bridge  
Hardware Installation  
Connect one Powerline  
Ethernet bridge to your  
ADSL or Cable modem’s  
Setp 1.  
Ethernet port.  
Plug it into the nearest  
Setp 2.  
power socket.  
Plug in the second  
Powerline Ethernet  
Setp 3. bridge next to your PC  
and connect the Ethernet  
ports.  
Internet access from any  
Setp 4. power socket in your  
home.  
Utility Installation for Windows  
The installation procedure for the Powerline Configuration utility  
will vary depending on which operating system you are using on  
your computer. The following procedure is for installation under  
Windows XP. Installation on other operation system is similar.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. Insert the CD into the CD-ROM drive to initiate the Autorun  
program. Once completed, a menu screen will appear.  
2. Click on the “Powerline Configuration Utility” hyperlink in  
PL-501 field to start the installation. If the menu screen is  
not shown, you can start the installation as follows.  
• Click on Start Menu/ Run.  
• Enter “E:\Utility\setup.exe” in the appeared box, where  
“E” is the letter of your CD-ROM drive.  
• Click on “OK” button.  
3. The utility will be installed into your computer  
and a new icon called “PowerPacket Utility”  
will appear on your desktop.  
This utility is only for Windows 2000, 2003, XP,  
and Vista.  
Note  
Further Configuration  
If you want to configure more detail settings of PL-501, please  
refer to user’s manual on the bundled CD.  
If you have any difficulty on resolving the problem while  
installing or using the PL-501, please contact the dealer where  
you purchased this product or you can contact PLANET directly  
at the following email address: [email protected]  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Paxar Printer 9840CL User Manual
Philips Bottle Warmer SCF612 10 User Manual
Philips Computer Monitor HW9190T User Manual
Philips Electric Shaver RQ1050 User Manual
Philips Laptop 13NB5602X User Manual
Philips Surge Protector SPP7354WA 37 User Manual
Philips TV Cables SWA2539W 10 User Manual
Polaris Utility Vehicle RZR XP 4 900 User Manual
Polycom IP Phone HDX 9001 User Manual
Polycom Server DOC2564A User Manual