Supplies Guide
Page 1 of 2
Supplies Guide
When Cartridge lowappears, you may need to order a new toner cartridge. You may be able to print a limited number of
pages when the message first appears, but it is best to have the new cartridge available when the current one runs out.
Ordering a toner cartridge
Notes:
• The estimated cartridge yield is based on approximately 5% coverage per page.
• Extremely low print coverage for extended periods of time may negatively affect actual yield.
Item
Return Program cartridge
Extra High Yield Toner Cartridge
24B6015
Ordering an imaging unit
Extremely low print coverage for extended periods of time may cause imaging unit parts to fail prior to exhaustion of toner.
For more information on replacing the imaging unit, see the instruction sheet that came with the supply.
Part name
Lexmark Return Program
Imaging unit
24B6025
Ordering a maintenance kit
To identify the supported fuser type, view the label on the fuser. Do either of the following:
• Remove the toner cartridge and imaging unit. The two-digit fuser type code (such as 00 or 01) can be seen on the front of
the fuser.
Warning—Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes. Extended
exposure to light may cause print quality problems.
• Pull down the printer rear door. The two-digit fuser type code (such as 00 or 01) can be seen on the rear of the fuser.
Notes:
• Using certain types of paper may require more frequent replacement of the maintenance kit.
• The separator roller, fuser, pick roller assembly, and transfer roller are all included in the maintenance kit and can be
individually ordered and replaced if necessary.
• For more information on replacing the parts included in the maintenance kit, see the instruction sheet that came with the
part.
Lexmark Return Program fuser maintenance kit type
Fuser maintenance kit type
Part number
40X8420
40X8421
40X8422
40X8423
M5100 Series Return Program fuser maintenance kit type 00
M5100 Series Return Program fuser maintenance kit type 01
M5100 Series Return Program fuser maintenance kit type 02
M5100 Series Return Program fuser maintenance kit type 03
|